1 / 5
Model No. : | CNZT002 |
---|---|
Brand Name : | Zhongtuo |
Material Thickness : | 1.5 To 2.0mm |
Cangzhou, Hebei, China
Opis produktu
Co to jest kanał kolumny?
Listwa jest zwykle formowana z blachy metalowej, składana do kształtu otwartego kanału z wygiętymi do wewnątrz wargami, aby zapewnić dodatkową sztywność i jako miejsce do montażu elementów łączących. Strut zwykle ma jakieś dziury w podstawie, aby ułatwić połączenie lub mocowanie podpory do podstawowych konstrukcji budynku. (zaczerpnięte z Wiki)
Mechanizm formowania rolkowego Strut channel 41x41 i 41x21 może być wykorzystany do wykonania kanałów, 41x21, 21x21 kanałów szczelinowych, kanału cienia, kanału C w serii, a cały proces odbywa się w pełni automatycznie.
Oto kilka profili rysowania dla twojego refernece :
Na rynku jest prosty kanał C Slotted, a następnie po prostu zapisz dziurki.
W następnej części sprawdź parametry maszyny :
KOMPONENTY MASZYNY :
1 |
Manualdecoiler |
1 set |
2 |
Leveling Machine |
1 set |
3 |
Roll Forming |
1 set |
4 |
Hydraulic Cutting |
1 set |
5 |
PLC Control System |
1 set |
6 |
Hydraulic Station |
1 set |
7 |
Run-out Table-(Un-powered) |
1 set |
1. Decoiler 3 Ton passive de-coiler with brake device Outside diameter of coil: 550mm Inside diameter of the coil: 450mm |
||
2. Feeding and leveling rollers: Rollers: 4 steps, leveling Rollers: 9pcs Diameter: 80mm Leveling thickness: 3.5mm
Feeding
speed: 20m/min
Punching device
|
||
3. Main forming machine : 1) Forming steps: 18 steps 2) Outer diameter: 70mm 3) Machine frame (type): memorial arch frame, Thickness of memorial arch frame: 30mm
4)
Roller information: B. Quenched degree: 56-58°C 5) Shaft material: 45# steel with heat treat and hard chrome plated on the surface 6) Main motor power: 18.5kw, Reducer ratio: 1:14, Reducer Type: Hardened reducer 7) With cooling device
|
||
4. Siemens control system with English 1). PLC brand: Siemens 2). Transducer brand: Siemens 3). Automatic length and quantity measurement 4). Stop control switch, to ensure the safety of production 5). Control station: Used to control product length and quantity, automatically cutting to length and stop when required quantity is achieved. 6). Error for length needs to be easy to adjust. |
||
5. Gearbox transmission: Gearbox transport A. Gear material: 42CrMo B. Processing technical: hardening gear grinding processing C. Gear lubrication system: automatic oil drip by computer control, oil drip time and amount can be controlled according the needs. D.Gear cooling system: Automatic cooling circulation tank, which can guarantee not to exceed the gear temperature limit.
|
||
7. Non-stop hydraulic cutting device
1).
Servo motor power: 5.5kw 4). Hydraulic cutting after forming, no distorting or wasting. High level safety factor. |
||
|
Cangzhou, Hebei, China
Wyślij swoje zapytanie do tego dostawcy