1 / 5
Model No. : | WJ-NF-SMD5050-15*26mm-24V-RGB |
---|---|
Brand Name : | Wilgex/ OEM |
Type : | Flex LED StripFlex LED Strip |
Opis produktu
RGB Neon Flex lights are an innovative LED product replacing the classic glass neon tubes. They can be used at every surface including edges and corners. And RGB neon flex is the most reliable color changing flexible neon product. It is the product of choice in flexible LED lights for building, garden,bridge or any other commercial application requiring alternating colors.
RGB Neon Flex delivers remarkably fluid color transitions lighting effect by utilizing advanced DMX and LED dimming technology.
#1, Striking and Unique Accent Lighting for building outline
#2, Overall Luminous Effect with High Brightness
#3, Specilized PVC extrusion make it UV, flame and chemical resistant and IP68 rated.
#4, Can be safely located outside even in salty envioronments, on the boat/yacht or by the sea
#5, Easily to be installed at different surface material with a special track
#6, 24V Low Volage, Low Heat Dissipation and Durability
#7, Flexible, Anti-broken and Extremely Safe
#8, Cut into any length and Bent into different shapes/patterns/text
#9, Excellent flexibility, can be bent arbitrarily and tailored easily for any ads signs and DIY board
• 4 Durability, Impact Re
sistant
• 5 Minimal heat dissipation (Safe to the touch)
• 6 Longer life to 50,000 Hours, 3 years warranty
• 7 Extremely low maintenance costs
• 8 70% less energy consumption of glass neon
• 9 Does not interfere with Video/Audio systems nearby
Dimensions: 9*15mm / 10*20mm /15*26mm ( Three opinions for your choice )
LED Light SMD 2835 LED Chip named Epistar brand
Running Length Single feed: 20 meters based on 24V version
Light Surface profile ( Dome surface and Flat surface )
Lumen Maintenance 70,000 Hours L70 @ 25°C : 90,000 L50 @ 25°
50,000 Hours L70 @ 50° : 70,000 Hours L50 @ 50°C
Chromaticity Ordinates x: 0.4715 y: 0.4279 u: 0.2624 v: 0.5354
Color Bin Tolerances +/- 3 %
Efficacy (lm/w) 41.42/W , Lux : 393 Lm / meter
CRI 75-80
Input Voltage: 12 V , 24V, 110V, 220V Constant Voltage
Power Consumption 9 watts per meter
Power Factor ≤ 1
LED Count per meter / 22 per foot
Dimming 110-277v, 0- 10v & Magnetic Low Voltage
Materials Polyvinyl Chloride (PVC)
LED Spacing 16.7 millimeter / .66 inch
Cutting Length 41.66 millimeters / 1.64 inches
Package Size: 33.5 × 33.5 ×39.1cm
Package Weight: 26 kilograms
Thermal Management Cool to the Touch, Free Air Convection
Fixture Connections Front & End Leader Cables
Bend Tolerances
Maximum Diameter 120 millimeters / 4.7 inches
(lateral bending only)
Temperature Ranges
Ambient -30° to 45° Celsius / -22° to 113° Fahrenheit
Operating -30° to 45° Celsius / -13° to 113° Fahrenheit
Humidity 0- 95% Non Condensing
*** Why do we use the copper conductor?
Advantage: 1, Extand the running length to 20M~25M without electrical current drop.
2, Resist pulling force
Disadvantage: 1, Bring the increased cost of raw material
2, Bring the increased cost of labor
Most up-to-date technique applied to make sure the brightest light, stable quality and longest lift span
Minimum 4.17cm unit cutting length
Maximum efficiency and minimum project length to satisfy customized projects
Excellent flexibility, it can satisfy any requirement of construction
1, Following the cutting mark showed in picture
2, Cut at cutting mark using heavy scissors (recommended using garden pruning shears, hose cutters or box cutter), be sure to cut the line square and not on an angle
3, Trim loose wires, don`t forget to trim any loose wires hanging out, flush to the PVC with sharp side cutters or scissors.
4, Using a pliers hold connecting pin and insert the pointed end of the electrical pin into the end of neon flex, the pin must be installed on the right side or it will not line up with the end cap on the power cord.
5, Using silicone sealant glue, seal the power cord cap
6, Aligning the pins with the receptacle holes in the place
7, Locate the heat shrink tube
8, Using silicone sealant glue, seal the end cap
9, Using the heat gun, gently warm the heat shrink tube until it shrinks into its final resting places, after completed, seal around both ends of the shrink tube with silicone sealant glue.
Old version(IP65 rated):
Aluminum tracks: Silver color and Black color for your opitons:
Ⅰ, 5CM in length mini Aluminum Track for LED neon flex
Ⅱ, 1M, 2M or 3M in length Aluminum Profile for LED neon flex
New Version connecter with cable for LED neon lights(IP68 rated)
End Exit Cable Side Exit Cable Bottom Exit Cable
Wilgex will provide you a total solution for all your customized requirements of your LED Neon flex projects.
WILGEX is a professional LED neon flex & LED outdoor lighting manufacturer and exporter. It is comprised of both highly experienced lighting professionals and technicians. As well as yound and forward-thinking staff.
At WILGEX, our core competency is innovative designs and marketable product choices. Utilizing moden technologies to inspire and challenges us, and to improve our production capabilities.
1, Small batch packaging (10 M/ Roll) |
2, Commercial consumer packing. (20 M/Roll)
3,Huge project packaging. (50 M/Roll)
Wyślij swoje zapytanie do tego dostawcy