1 / 5
Model No. : | MMW-1 |
---|---|
Brand Name : | Chenda |
Type : | Friction Testing Machine |
Jinan, Shandong, China
Opis produktu
Specyfikacja techniczna:
1. Test force |
|
1.1 Axial test force working range |
10~1000N |
1.2 Error of indicationg value lower than 200N |
Not bigger than±2N |
Error of indicationg value upper than 200N |
Not bigger than±1% |
1.3 Discriminability of test force |
Not bigger than 1.5N |
1.4 Relative error of long time auto hold indicating value |
Not bigger than±1%FS |
1.5 Return zero error of digital display device of test force indicating value |
Not bigger than±0.2%FS |
2. Friction Moment |
|
2.1 Measuring maximum friction moment |
2.5N.m |
2.2 Relative error of friction moment indicating value |
±2% |
2.3 Friction force weighing transducer |
50N |
2.4 Friction force arm distance |
50mm |
2.5 Discriminability of friction moment indicating value |
Not bigger than 25N.mm |
2.6 Return zero error of digital display device of friction |
Not bigger than ±0.2%FS |
3. Range of spindle stepless speed variation |
|
3.1 Stepless speed variation |
1~2000r/min |
3.2 Special deceleration system |
0.05~20r/min |
3.3 For over 100r/min, error of spindle speed |
Not bigger than ±5r/min |
For below 100r/min, error of spindle speed |
Not bigger than ±1r/min |
4. Testing Media |
Oil, water, muddy water, abrasive material |
5. Heatinig system |
|
5.1 Heater working range |
Room temperature~260℃ |
5.2 Disc type heater |
Φ65,220V,250W |
5.3 Platinum thermo resistance |
1 group each(long&short) |
5.4 Temperature measuring control accuracy |
±2℃ |
6. Conicity of spindel of testing machine |
1:7 |
7. Max. Distance between spindle and lower disc |
≥75mm |
8. Spindel control mode |
|
8.1 Manual control |
|
8.2 Time control |
|
8.3 Revolution control |
|
8.4 Friction moment control |
|
9. Time display&control range |
0s~9999min |
10. Revolution display&control range |
0~9999999 |
11. Output maximum moment of main motor |
5N.m |
12. Overall dimension(L*W*H) |
750*700*1700mm |
13. Net weight |
About 700kgs |
Główny parametr techniczny :
1. Max. Siła testowa: 1000N
2. Prędkość wrzeciona: 10 ~ 2000r / min
3. Maksymalny moment tarcia: 2,5 Nm
4. Względny błąd siły testowej: ± 1%
5. Zakres regulacji temperatury próbki: temperatura pomieszczenia ~ 260 ℃
6. Wymiar (L * W * H): 750 * 700 * 1700 mm
Testowy diagram tarcia:
1. Test tarcia w pinie
Próbka do testu tarcia prętowego jest cylindrycznym sworzniem pod próbką pierścienia. Może uczynić proces materailu próbką szpilki. Jeśli siła badania jest niewielka, może wykonać test tarcia z pojedynczą szpilką, a także wykonać test trzema bolcami w tym samym czasie. Tarcie w następujący sposób:
2. Test tarcia końca pierścienia oporowego
Potrafi wykonać test zużycia pomiędzy dwiema matarilowymi twarzami. Próbka tarcia badanego materaila może być przetworzona na górną i dolną warstwę.
Jinan, Shandong, China
Wyślij swoje zapytanie do tego dostawcy